Support end connector
The Irus support end connector serves to stabilise the ends of 2 boards/panels. This connector can also be used for supporting shelves. The connector can be attached at a desired height and the board/panel positioned on top. Counters and display cases permit optimum use.
|Clamping screw / or panel thicknesses||Item No.|
|plastic clamping screw / of 10-13 mm||01.307|
|plastic clamping screw / of 13-16 mm||01.407|
You might also be interested in
Basic element type T
The basic element Type T is used as an end fitting for boards/panels. Ground unevenness can be compensated for by using the adjustable legs. Simply screw the adjustable leg in or out.
The positive feature of the Irus multifunction connectors is that they have stepless adjustment from 0°-360°.
The Irus wall connection is highly suitable for all fixations to the wall. Partitions, wall orientation boards, wall shelf systems with a thickness of 3-8 mm can be realised with the wall connector.
The Irus angle connector is a flexible connector for stepless adjustment between 90°-270°.